Fiberlock Products

 

blog

Advanced Peroxide Cleaner (8314-1-C4, 8314-2.5-C2)Advanced Peroxide Cleaner is the most advanced cleaner available for the restoration and remediation professional. It aggressively removes stains and odors caused by mold, mildew, bacteria and other microbial growth on porous, semi-porous and non-porous materials.

SDSblog    Data Sheet blog

 

blog

Aftershock – (8390-1-C4, 8390-5) – AfterShock is an EPA registered antimicrobial coating designed to kill residual mold and mildew remaining after pre-cleaning contaminated surfaces. AfterShock also inhibits the future growth and spread of mold and mildew on the cured film surface in residential and institutional buildings. This extremely durable, easy to apply, 100% acrylic sealant offers the ultimate combination of durability, application ease and fungal-resistance to address mold growth in nearly any situation. AfterShock is recommended for use on interior wall surfaces such as plaster, wallboard, drywall, concrete, masonry block, wood, primed metal and galvanized metal. AfterShock is also recommended for use on interior wood framing, primed metal, concrete, and wallboard inside wall cavities.

SDSblog    Data Sheet blog

 

blog

HydroBoost (8313-Q-C12) – HydroBoost is specifically designed to magnify the cleaning and stain removing power of Advanced Peroxide Cleaner (APC). Ideal for situations that demand extreme cleaning and powerful stain removal, HydroBoost works by instantly increasing the oxidation potential of Advanced Peroxide Cleaner.

SDSblog    Data Sheet blog

 

blog

IAQ 6000 (8360-5) – IAQ 6000 is a white, tintable mold-resistant coating for professional use, that contains an EPA-registered, broad-spectrum fungicide to prevent mold growth on the surface of the cured film. IAQ 6000 is a durable, flexible, and permeable 100% acrylic water-based coating that can withstand the moist, humid conditions present in environments conducive to mold growth.

SDSblog    Data Sheet blog

 

blog

IAQ 6100 (8361-5) – IAQ 6100 is a clear mold-resistant coating for professional use that contains an EPA-registered, broad-spectrum fungicide to prevent mold growth on the surface of the cured film. IAQ 6100 is a durable, flexible, and permeable 100% acrylic water-based semi-gloss coating that applies white so the user can ensure complete and thorough application, and then dries to a clear finish.

SDSblog    Data Sheet blog

 

blog

LBC (5800-5, 5801-1-C4, 5801-5) – LBC Lead Barrier Compound is a thermoplastic-elastomeric water based copolymer blended specifically to form a barrier between lead-based paint and the environment. It is a high-solids coating formulated to offer unparalleled coverage, economics and aesthetics while preserving historic and architectural detail. LBC contains Bitrex®, a bitter-tasting ingredient to discourage oral contact with lead paint. LBC complies with all EPA and HUD requirements for lead-based paint encapsulants and is recognized as a permanent method for abatement of lead-based paint. LBC meets all Federal, State and Local standards for lead-based paint encapsulants. LBC has been independently tested and was found to meet and surpass the ASTM E-1795 standard for lead-based paint encapsulants for both indoor and outdoor use.  *5800 is antique linen, 5801 is off-white

SDSblog    Data Sheet blog

 

blog

NexStrip Pro (5701-5) – Piranha NexStrip Pro is the next generation water based, maximum strength paint and coating remover. Piranha NexStrip Pro contains our unique dual action stripping formula. The first stage begins by attacking the paint system on contact. The second stage penetrates into the paint system and delaminates it from underneath for complete paint removal. This unique paste formulation clings to and tenaciously attacks multiple layers of almost any coating system. Easy to work with and easy to clean up, Piranha NexStrip Pro does not contain methylene chloride, methanol, chlorinated solvents, caustics or petroleum-based solvents. Piranha NexStrip Pro is low-odor, non-flammable and can be used on interior and exterior surfaces.

SDSblog    Data Sheet blog

 

blog

NexStrip 8 (5702-5) – Piranha NexStrip 8 is a low odor, self skinning caustic paste paint stripper that can liquefy up to 30 layers of paint on a variety of substrates. Piranha NexStrip 8 has an easy-to-apply, buttery-smooth texture that makes application easy. Piranha NexStrip 8 removes most paints, varnishes, and latex paints from metal, stone, concrete, brick, wood and plaster. Ideal for multi-layer paint systems, Piranha NexStrip 8 is particularly well suited for stripping lead-based paints (including red lead primer) from painted steel structures. Surfaces must be neutralized after using Piranha NexStrip 8.

SDSblog    Data Sheet blog

 

blog

Piranha NexStrip Zero (5700-5) – Piranha NexStrip Zero is the next generation water based, zero VOC paint and coating remover. The unique zero VOC paste formulation clings to and tenaciously attacks multiple layers of almost any coating system. Designed with virtually no detectable odor, NexStrip Zero is ideal for schools, hospitals, or any project in occupied structures. Easy to work with and easy to clean up, Piranha NexStrip Zero does not contain methylene chloride, methanol, chlorinated solvents, caustics or petroleum-based solvents. Piranha NexStrip Zero is low odor and non-flammable. It can be used on interior and exterior surfaces including concrete, brick, stone, aluminum, wood, fiberglass, plastic and other surfaces.

SDSblog    Data Sheet blog

 

blog

RECON™ Smoke Odor Sealer (3090-1-C4, 3090-5, 3091-1-C4, 3091-5) – RECON™ Smoke Odor Sealer is a revolutionary solvent free smoke odor sealant and stain blocker that encapsulates smoke odors on multiple surfaces and blocks the toughest stains. RECON Smoke Odor Sealer’s OdorLock™ technology prevents smoke odors and stains from migrating through the coating. This technology provides odor control in one application on most surfaces and continues to block odors even with seasonal changes in temperature and humidity.  *3090 is white, 3091 is clear

SDSblog    Data Sheet blog

 

blog

ShockWave (8310-1-C4, 8311-10) – ShockWave is an EPA registered, quaternary ammonium chloride cleaner, disinfectant, and sanitizer designed for use on various surfaces subject to microbial contamination. ShockWave is a concentrated formula that will disinfect hard, nonporous surfaces, and also sanitizes porous and semi-porous surfaces. ShockWave concentrate is designed to be diluted two ounces per gallon of water, yielding 64 gallons of usable product per gallon of concentrate, making it an economical solution for your cleaning, disinfecting, and sanitizing needs.  ShockWave has over 140 organism kill claims including Aspergillus niger, Penecillium spinulosum, Cryptococcus neoformans, E. coli, MRSA, Norovirus, Salmonella, HIV, Hepatitis-B, Herpes, Poliovirus, and many other pathogenic and environmental microbial organisms.  *8311 is 10 oz. bottles

SDSblog    Data Sheet blog

 

blog

ShockWave RTU (8316-1-C4, 8316-5) – ShockWave RTU is an EPA registered, quaternary ammonium chloride cleaner, disinfectant, and sanitizer designed for use on various surfaces subject to microbial contamination. ShockWave is a Ready-To-Use  formula that will disinfect hard, nonporous surfaces, and also sanitizes porous and semi-porous surfaces. ShockWave RTU is especially useful as an all-in-one product for treating wood structural members, carpets, and other porous and nonporous surfaces as part of a complete mold remediation project. ShockWave RTU is perfect for when a clean water source is not available.

SDSblog    Data Sheet blog